# Makefile.in generated by automake 1.10 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/parted
pkglibdir = $(libdir)/parted
pkgincludedir = $(includedir)/parted
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = mips-unknown-linux-gnu
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/libparted.pc.in \
	$(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
	INSTALL NEWS THANKS TODO build-aux/compile \
	build-aux/config.guess build-aux/config.rpath \
	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
	build-aux/ltmain.sh build-aux/mdate-sh build-aux/missing \
	build-aux/texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \
	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/assert.m4 \
	$(top_srcdir)/m4/atexit.m4 $(top_srcdir)/m4/calloc.m4 \
	$(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
	$(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/config-h.m4 \
	$(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dos.m4 \
	$(top_srcdir)/m4/double-slash-root.m4 \
	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
	$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fpending.m4 \
	$(top_srcdir)/m4/free.m4 $(top_srcdir)/m4/getopt.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
	$(top_srcdir)/m4/gnulib-common.m4 \
	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/lib-ignore.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/localcharset.m4 \
	$(top_srcdir)/m4/long-options.m4 $(top_srcdir)/m4/longlong.m4 \
	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
	$(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/memcmp.m4 \
	$(top_srcdir)/m4/memcpy.m4 $(top_srcdir)/m4/memmove.m4 \
	$(top_srcdir)/m4/memset.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/regex.m4 \
	$(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/rpmatch.m4 \
	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdarg.m4 \
	$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stdint.m4 \
	$(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/strcspn.m4 \
	$(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/strndup.m4 \
	$(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtod.m4 \
	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/unistd_h.m4 \
	$(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utime.m4 \
	$(top_srcdir)/m4/utimes-null.m4 $(top_srcdir)/m4/wchar.m4 \
	$(top_srcdir)/m4/wctype.m4 $(top_srcdir)/m4/wint_t.m4 \
	$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/lib/config.h
CONFIG_CLEAN_FILES = libparted.pc
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pcdir)"
pcDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ABSOLUTE_INTTYPES_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/inttypes.h"
ABSOLUTE_STDINT_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/stdint.h"
ABSOLUTE_STDLIB_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/stdlib.h"
ABSOLUTE_STRING_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/string.h"
ABSOLUTE_UNISTD_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/unistd.h"
ABSOLUTE_WCHAR_H = 
ABSOLUTE_WCTYPE_H = "///mnt/tool2/montavista/pro/devkit/mips/mips2_fp_be/bin/../target/usr/include/wctype.h"
ACLOCAL = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run aclocal-1.10
ALLOCA = 
ALLOCA_H = alloca.h
AMTAR = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run tar
AR = mips2_fp_be-ar
AUTOCONF = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run autoheader
AUTOMAKE = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run automake-1.10
AWK = gawk
BITSIZEOF_PTRDIFF_T = 
BITSIZEOF_SIG_ATOMIC_T = 
BITSIZEOF_SIZE_T = 
BITSIZEOF_WCHAR_T = 
BITSIZEOF_WINT_T = 
BUILDINFO = kumano@aquos-devel, 02 Feb 2011 14:27
CC = mips2_fp_be-gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS = -fgnu89-inline -g -O2 -Werror -Werror
CHECK_CFLAGS = 
CHECK_LIBS = 
CPP = mips2_fp_be-gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = 
DEPDIR = .deps
DL_LIBS = -ldl
DM_LIBS = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = 
FFLAGS = 
GETOPT_H = 
GLIBC21 = yes
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = :
GNULIB_CHOWN = 0
GNULIB_DUP2 = 0
GNULIB_FCHDIR = 0
GNULIB_FTRUNCATE = 0
GNULIB_GETCWD = 0
GNULIB_GETLOGIN_R = 0
GNULIB_GETSUBOPT = 0
GNULIB_IMAXABS = 0
GNULIB_IMAXDIV = 0
GNULIB_MBSCASECMP = 0
GNULIB_MBSCASESTR = 0
GNULIB_MBSCHR = 0
GNULIB_MBSCSPN = 0
GNULIB_MBSLEN = 0
GNULIB_MBSNCASECMP = 0
GNULIB_MBSPBRK = 0
GNULIB_MBSPCASECMP = 0
GNULIB_MBSRCHR = 0
GNULIB_MBSSEP = 0
GNULIB_MBSSPN = 0
GNULIB_MBSSTR = 0
GNULIB_MBSTOK_R = 0
GNULIB_MEMMEM = 0
GNULIB_MEMPCPY = 0
GNULIB_MEMRCHR = 0
GNULIB_MKDTEMP = 0
GNULIB_MKSTEMP = 0
GNULIB_READLINK = 0
GNULIB_SLEEP = 0
GNULIB_STPCPY = 0
GNULIB_STPNCPY = 0
GNULIB_STRCASESTR = 0
GNULIB_STRCHRNUL = 0
GNULIB_STRDUP = 0
GNULIB_STRNDUP = 1
GNULIB_STRNLEN = 1
GNULIB_STRPBRK = 0
GNULIB_STRSEP = 0
GNULIB_STRTOIMAX = 0
GNULIB_STRTOK_R = 0
GNULIB_STRTOUMAX = 0
GREP = /bin/grep
HAVE_DECL_GETLOGIN_R = 1
HAVE_DECL_IMAXABS = 1
HAVE_DECL_IMAXDIV = 1
HAVE_DECL_MEMMEM = 1
HAVE_DECL_MEMRCHR = 1
HAVE_DECL_STRDUP = 1
HAVE_DECL_STRNCASECMP = 1
HAVE_DECL_STRNDUP = 1
HAVE_DECL_STRNLEN = 1
HAVE_DECL_STRTOIMAX = 1
HAVE_DECL_STRTOK_R = 1
HAVE_DECL_STRTOUMAX = 1
HAVE_DUP2 = 1
HAVE_FTRUNCATE = 1
HAVE_GETSUBOPT = 1
HAVE_INTTYPES_H = 1
HAVE_ISWCNTRL = 1
HAVE_LONG_LONG_INT = 1
HAVE_MEMPCPY = 1
HAVE_MKDTEMP = 1
HAVE_READLINK = 1
HAVE_SIGNED_SIG_ATOMIC_T = 
HAVE_SIGNED_WCHAR_T = 
HAVE_SIGNED_WINT_T = 
HAVE_SLEEP = 1
HAVE_STDINT_H = 1
HAVE_STPCPY = 1
HAVE_STPNCPY = 1
HAVE_STRCASECMP = 1
HAVE_STRCASESTR = 1
HAVE_STRCHRNUL = 1
HAVE_STRNDUP = 0
HAVE_STRPBRK = 1
HAVE_STRSEP = 1
HAVE_SYS_BITYPES_H = 
HAVE_SYS_INTTYPES_H = 
HAVE_SYS_TYPES_H = 1
HAVE_UNISTD_H = 1
HAVE_UNSIGNED_LONG_LONG_INT = 1
HAVE_WCTYPE_H = 1
HAVE_WINT_T = 1
HAVE__BOOL = 1
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLINCS = 
INTLLIBS = 
INTL_MACOSX_LIBS = 
INTTYPES_H = inttypes.h
LDFLAGS =  -Wl,--as-needed -rdynamic
LIBICONV = -liconv
LIBINTL = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTALLOCA = 
LTLIBICONV = -liconv
LTLIBINTL = 
LTLIBOBJS = 
LT_AGE = 0
LT_CURRENT = 7
LT_RELEASE = 1.8
LT_REVISION = 0
MAKEINFO = ${SHELL} /home/kumano/download/tmp/parted-1.8.7/build-aux/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = :
MSGMERGE = /usr/bin/msgmerge
OBJEXT = o
OS = linux
OS_LIBS = 
PACKAGE = parted
PACKAGE_BUGREPORT = bug-parted@gnu.org
PACKAGE_NAME = GNU parted
PACKAGE_STRING = GNU parted 1.8.7
PACKAGE_TARNAME = parted
PACKAGE_VERSION = 1.8.7
PARTEDLDFLAGS = 
PARTED_LIBS =  -ldl
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
POSUB = 
POW_LIB = 
PRIPTR_PREFIX = ""
PRI_MACROS_BROKEN = 0
PTRDIFF_T_SUFFIX = 
RANLIB = mips2_fp_be-ranlib
REISER_LIBS = 
REPLACE_CHOWN = 0
REPLACE_FCHDIR = 0
REPLACE_GETCWD = 0
REPLACE_MKSTEMP = 0
SED = /bin/sed
SELINUX_LIBS = 
SET_MAKE = 
SHELL = /bin/sh
SIG_ATOMIC_T_SUFFIX = 
SIZE_T_SUFFIX = 
STDBOOL_H = 
STDINT_H = 
STRIP = mips2_fp_be-strip
USE_NLS = no
UUID_LIBS = -luuid
VERSION = 1.8.7
WCHAR_H = 
WCHAR_T_SUFFIX = 
WCTYPE_H = 
WINT_T_SUFFIX = 
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = :
abs_builddir = /home/kumano/download/tmp/parted-1.8.7
abs_srcdir = /home/kumano/download/tmp/parted-1.8.7
abs_top_builddir = /home/kumano/download/tmp/parted-1.8.7
abs_top_srcdir = /home/kumano/download/tmp/parted-1.8.7
ac_ct_CC = 
ac_ct_CXX = g++
ac_ct_F77 = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = i686-pc-linux-gnu
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
gl_LIBOBJS =  basename.o close-stream.o closeout.o dirname.o exitfail.o long-options.o memcmp.o memcpy.o memmove.o memset.o quotearg.o regex.o rename.o safe-read.o safe-write.o strcspn.o stripslash.o strndup.o strnlen.o strtod.o utime.o xmalloc.o
gl_LTLIBOBJS =  basename.lo close-stream.lo closeout.lo dirname.lo exitfail.lo long-options.lo memcmp.lo memcpy.lo memmove.lo memset.lo quotearg.lo regex.lo rename.lo safe-read.lo safe-write.lo strcspn.lo stripslash.lo strndup.lo strnlen.lo strtod.lo utime.lo xmalloc.lo
host = mips-unknown-linux-gnu
host_alias = mips-linux-gnu
host_cpu = mips
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/kumano/download/tmp/parted-1.8.7/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_builddir = .
top_srcdir = .
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = po lib libparted parted partprobe include doc debug tests
EXTRA_DIST = \
  .prev-version				\
  BUGS					\
  libparted.pc.in			\
  parted.spec.in			\
  parted.spec				\
  scripts/data/abi/baseline_symbols.txt \
  scripts/extract_symvers		\
  Makefile.cfg				\
  Makefile.maint			\
  GNUmakefile

aclocaldir = $(datadir)/aclocal
pcdir = $(libdir)/pkgconfig
pc_DATA = libparted.pc
MAINTAINERCLEANFILES = parted.spec ABOUT-NLS ChangeLog INSTALL \
	aclocal.m4 configure

### ABI Checking scripts ###
baseline_file = ${top_srcdir}/scripts/data/abi/baseline_symbols.txt
extract_symvers = $(top_srcdir)/scripts/extract_symvers
MOSTLYCLEANDIRS = m4
all: all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
libparted.pc: $(top_builddir)/config.status $(srcdir)/libparted.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
install-pcDATA: $(pc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pcdir)" || $(MKDIR_P) "$(DESTDIR)$(pcdir)"
	@list='$(pc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pcDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pcdir)/$$f'"; \
	  $(pcDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pcdir)/$$f"; \
	done

uninstall-pcDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pcdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pcdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d $(distdir) || mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pcdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-pcDATA

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-pcDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
	distclean-generic distclean-libtool distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pcDATA install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-pcDATA


# This is best not done via configure.ac, because automake's
# make distcheck target does not like auto-generated files
# being included in the distributed archive.
parted.spec: parted.spec.in
	sed 's/@''PACKAGE@/$(PACKAGE)/;s/@''VERSION@/$(VERSION)/' $< > $@-tmp
	mv $@-tmp $@

distcheck-hook:
	$(MAKE) my-distcheck

current_symbols.txt: ${extract_symvers}
	  -@(sh ${extract_symvers} libparted/.libs/libparted.so current_symbols.txt)

baseline_symbols:
	-@(output=${baseline_file}; \
	  if test ! -f $${output}; then \
	    echo "Baseline file doesn't exist."; \
	    echo "Try 'make new-abi-baseline' to create it."; \
	    exit 1; \
	  fi; true)

new-abi-baseline:
	-@$(mkinstalldirs) ${baseline_dir}
	-@(output=${baseline_file}; \
	  if test -f $${output}; then \
	    output=$${output}.new; \
	    t=`echo $${output} | sed 's=.*config/abi/=='`; \
	    echo "Baseline file already exists, writing to $${t} instead."; \
	  fi; \
	  sh ${extract_symvers} libparted/.libs/libparted.so $${output})

# Use 'new-abi-baseline' to create an initial symbol file.  Then run
# 'check-abi' to test for changes against that file.
check-abi: baseline_symbols current_symbols.txt
	@diff -u ${baseline_file} ./current_symbols.txt 2>&1 \
         | tee libparted.abi-diff
	@test `wc -l < libparted.abi-diff` -gt 0 \
         && (echo "ABI has changed. Please, update you ABI package version."; exit 1) \
         || exit 0
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
